Infrared
From Wikipedia, the free encyclopedia
Infrared (IR) radiation is electromagnetic radiation of a wavelength longer than that of visible light, but shorter than that of radio waves. The name means "below red" (from the Latin infra, "below"), red being the color of visible light with the longest wavelength. Infrared radiation has wavelengths between about 750 nm and 1 mm, spanning three orders of magnitude.[1]
The uses of infrared include military, such as: target acquisition, surveillance, homing and tracking and non-military, such as thermal efficiency analysis, remote temperature sensing, short-ranged wireless communication, spectroscopy, and weather forecasting. Infrared astronomy uses sensor-equipped telescopes to penetrate dusty regions of space, such as molecular clouds; detect cool objects such as planets, and to view highly red-shifted objects from the early days of the universe.[2]
At the atomic level, infrared energy elicits vibrational modes in a molecule through a change in the dipole moment, making it a useful frequency range for study of these energy states. Infrared spectroscopy examines absorption and transmission of photons in the infrared energy range, based on their frequency and intensity.[3]
Contents[hide] |
[edit] Different regions in the infrared
Objects generally emit infrared radiation across a spectrum of wavelengths, but only a specific region of the spectrum is of interest because sensors are usually designed only to collect radiation within a specific bandwidth. As a result, the infrared band is often subdivided into smaller sections. There are no standard divisions, but a commonly used scheme is:[citation needed]
- Near-infrared (NIR, IR-A DIN): 0.75-1.4 µm in wavelength, defined by the water absorption, and commonly used in fiber optic telecommunication because of low attenuation losses in the SiO2 glass (silica) medium. Image intensifiers are sensitive to this area of the spectrum. Examples include night vision devices such as night vision goggles.
- Short-wavelength infrared (SWIR, IR-B DIN): 1.4-3 µm, water absorption increases significantly at 1,450 nm. The 1,530 to 1,560 nm range is the dominant spectral region for long-distance telecommunications
- Mid-wavelength infrared (MWIR, IR-C DIN) also called intermediate infrared (IIR): 3-8 µm. In guided missile technology this is the 'heat seeking' region in which the homing heads of passive IR homing missiles are designed to work, homing on to the IR signature of the target aircraft, typically the jet engine exhaust plume.
- Long-wavelength infrared (LWIR, IR-C DIN): 8–15 µm. This is the "thermal imaging" region, in which sensors can obtain a completely passive picture of the outside world based on thermal emissions only and requiring no external light or thermal source such as the sun, moon or infrared illuminator. Forward-looking infrared (FLIR) systems use this area of the spectrum. Sometimes also called the "far infrared."
- Far infrared (FIR): 15-1,000 µm (see also far infrared laser)
NIR and SWIR is sometimes called reflected infrared while MWIR and LWIR is sometimes referred to as thermal infrared. Due to the nature of the blackbody radiation curves, typical 'hot' objects, such as exhaust pipes, often appear brighter in the MW compared to the same object viewed in the LW.
Astronomers typically divide the infrared spectrum as follows:[4]
- near: (0.7-1) to 5 µm
- mid: 5 to (25-40) µm
- long: (25-40) to (200-350) µm
These divisions are not precise and can vary depending on the publication. The three regions are used for observation of different temperature ranges, and hence different environments in space.
A third scheme divides up the band based on the response of various detectors:[5]
- Near infrared (NIR): from 0.7 to 1.0 micrometers (from the approximate end of the response of the human eye to that of silicon)
- Short-wave infrared (SWIR): 1.0 to 3 micrometers (from the cut off of silicon to that of the MWIR atmospheric window. InGaAs covers to about 1.8 micrometers; the less sensitive lead salts cover this region
- Mid-wave infrared (MWIR): 3 to 5 micrometers (defined by the atmospheric window and covered by InSb and HgCdTe and partially PbSe)
- Long-wave infrared (LWIR): 8 to 12, or 7 to 14 micrometers: the atmospheric window (Covered by HgCdTe and microbolometers)
- Very-long wave infrared (VLWIR): 12 to about 30 micrometers, covered by doped silicon
These divisions are justified by the different human response to this radiation: near infrared is the region closest in wavelength to the radiation detectable by the human eye, mid and far infrared are progressively further from the visible regime. Other definitions follow different physical mechanisms (emission peaks, vs. bands, water absorption) and the newest follow technical reasons (The common silicon detectors are sensitive to about 1,050 nm, while InGaAs' sensitivity starts around 950 nm and ends between 1,700 and 2,600 nm, depending on the specific configuration). Unfortunately, international standards for these specifications are not currently available.
The boundary between visible and infrared light is not precisely defined. The human eye is markedly less sensitive to light above 700 nm wavelength, so shorter frequencies make insignificant contributions to scenes illuminated by common light sources. But particularly intense light (e.g., from lasers, or from bright daylight with the visible light removed by colored gels[1]) can be detected up to approximately 780 nm, and will be perceived as red light. The onset of infrared is defined (according to different standards) at various values typically between 700 nm and 800 nm.
[edit] Telecommunication bands in the infrared
In optical communications, the part of the infrared spectrum that is used is divided into several bands based on availability of light sources, transmitting/absorbing materials (fibers) and detectors:[6]
| Band | Descriptor | Wavelength range |
|---|---|---|
| O band | Original | 1260–1360 nm |
| E band | Extended | 1360–1460 nm |
| S band | Short wavelength | 1460–1530 nm |
| C band | Conventional | 1530–1565 nm |
| L band | Long wavelength | 1565–1625 nm |
| U band | Ultralong wavelength | 1625–1675 nm |
The C-band is the dominant band for long-distance telecommunication networks. The S and L bands are based on less well established technology, and are not as widely deployed.
[edit] Heat
Infrared radiation is popularly known as "heat" or sometimes "heat radiation", since many people attribute all radiant heating to infrared light. This is a widespread misconception, since light and electromagnetic waves of any frequency will heat surfaces that absorb them. Infrared light from the Sun only accounts for 49%[7] of the heating of the Earth, the rest being caused by visible light that is absorbed then re-radiated at longer wavelengths. Visible light or ultraviolet-emitting lasers can char paper and incandescently hot objects emit visible radiation. It is true that objects at room temperature will emit radiation mostly concentrated in the 8 to 12 micrometer band, but this is not distinct from the emission of visible light by incandescent objects and ultraviolet by even hotter objects (see black body and Wien's displacement law).[8]
Heat is energy in transient form that flows due to temperature difference. Unlike heat transmitted by thermal conduction or thermal convection, radiation can propagate through a vacuum.
The concept of emissivity is important in understanding the infrared emissions of objects. This is a property of a surface which describes how its thermal emissions deviate from the ideal of a blackbody. To further explain, two objects at the same physical temperature will not 'appear' the same temperature in an infrared image if they have differing emissivities.
[edit] Applications
[edit] Night vision
Infrared is used in night-vision equipment when there is insufficient visible light to see.[9] Night vision devices operate through a process involving the conversion of ambient light photons into electrons which are then amplified by a chemical and electrical process and then converted back into visible light.[9] Infrared light sources can be used to augment the available ambient light for conversion by night vision devices, increasing in-the-dark visibility without actually using a visible light source.[9]
The use of infrared light and night vision devices should not be confused with thermal imaging which creates images based on differences in surface temperature by detecting infrared radiation (heat) that emanates from objects and their surrounding environment [10]
[edit] Thermography
Infrared thermography is a non-contact, non-destructive test method that utilizes a thermal imager to detect, display and record thermal patterns and temperatures across the surface of an object. Infrared thermography may be applied to any situation where knowledge of thermal profiles and temperatures will provide meaningful data about a system, object or process. Thermography is widely used in industry for predictive maintenance, condition assessment, quality assurance, and forensic investigations of electrical, mechanical and structural systems. Other applications include, but are not limited to: law enforcement, firefighting, search and rescue, and medical and veterinary sciences.
Aside from test equipment, training is the most important investment a company will make in an infrared inspection program. Advances in technology have provided infrared equipment that is user-friendly; however, infrared thermography is not a "simply point and shoot" technology. In addition to understanding the object or system being inspected, thermographers must also understand common error sources that can influence observed thermal data. Typically,infrared training courses should cover the topics of infrared theory, heat transfer concepts, equipment selection and operation, how to eliminate or overcome common error sources, and specific applications. Training courses from independent training companies are preferred since they are not biased toward a single brand or type of equipment.
[edit] Other imaging
In infrared photography, infrared filters are used to capture the near-infrared spectrum. Digital cameras often use infrared blockers. Cheaper digital cameras and some camera phones which do not have appropriate filters can "see" near-infrared, appearing as a bright white color (try pointing a TV remote at your digital camera). This is especially pronounced when taking pictures of subjects near IR-bright areas (such as near a lamp), where the resulting infrared interference can wash out the image. There is also a technique called 'T-ray' imaging, which is imaging using far infrared or terahertz radiation. Lack of bright sources makes terahertz photography technically more challenging than most other infrared imaging techniques. Recently T-ray imaging has been of considerable interest due to a number of new developments such as terahertz time-domain spectroscopy.
[edit] Tracking
See infrared homing
[edit] Heating
Infrared radiation can be used as a deliberate heating source. For example it is used in infrared saunas to heat the occupants, and also to remove ice from the wings of aircraft (de-icing). It is also gaining popularity as a method of heating asphalt pavements in place during new construction or in repair of damaged asphalt. Infrared can be used in cooking and heating food as it predominantly heats the opaque, absorbent objects, rather than the air around them.
Infrared heating is also becoming more popular in industrial manufacturing processes, e.g. curing of coatings, forming of plastics, annealing, plastic welding, print drying. In these applications, infrared heaters replace convection ovens and contact heating. Efficiency is achieved by matching the wavelength of the infrared heater to the absorption characteristics of the material.
[edit] Communications
IR data transmission is also employed in short-range communication among computer peripherals and personal digital assistants. These devices usually conform to standards published by IrDA, the Infrared Data Association. Remote controls and IrDA devices use infrared light-emitting diodes (LEDs) to emit infrared radiation which is focused by a plastic lens into a narrow beam. The beam is modulated, i.e. switched on and off, to encode the data. The receiver uses a silicon photodiode to convert the infrared radiation to an electric current. It responds only to the rapidly pulsing signal created by the transmitter, and filters out slowly changing infrared radiation from ambient light. Infrared communications are useful for indoor use in areas of high population density. IR does not penetrate walls and so does not interfere with other devices in adjoining rooms. Infrared is the most common way for remote controls to command appliances.
Free space optical communication using infrared lasers can be a relatively inexpensive way to install a communications link in an urban area operating at up to 4 gigabit/s, compared to the cost of burying fiber optic cable.
Infrared lasers are used to provide the light for optical fiber communications systems. Infrared light with a wavelength around 1,330 nm (least dispersion) or 1,550 nm (best transmission) are the best choices for standard silica fibers.
[edit] Spectroscopy
Infrared vibrational spectroscopy (see also near infrared spectroscopy) is a technique which can be used to identify molecules by analysis of their constituent bonds. Each chemical bond in a molecule vibrates at a frequency which is characteristic of that bond. A group of atoms in a molecule (e.g. CH2) may have multiple modes of oscillation caused by the stretching and bending motions of the group as a whole. If an oscillation leads to a change in dipole in the molecule, then it will absorb a photon which has the same frequency. The vibrational frequencies of most molecules correspond to the frequencies of infrared light. Typically, the technique is used to study organic compounds using light radiation from 4000-400 cm-1, the mid-infrared. A spectrum of all the frequencies of absorption in a sample is recorded. This can be used to gain information about the sample composition in terms of chemical groups present and also its purity (for example a wet sample will show a broad O-H absorption around 3200cm-1).
[edit] Meteorology
Weather satellites equipped with scanning radiometers produce thermal or infrared images which can then enable a trained analyst to determine cloud heights and types, to calculate land and surface water temperatures, and to locate ocean surface features. The scanning is typically in the range 10.3-12.5 µm (IR4 and IR5 channels).
High, cold ice cloud such as Cirrus or Cumulonimbus show up bright white, lower warmer cloud such as Stratus or Stratocumulus show up as grey with intermediate clouds shaded accordingly. Hot land surfaces will show up as dark grey or black. One disadvantage of infrared imagery is that low cloud such as stratus or fog can be a similar temperature to the surrounding land or sea surface does not show up. However using the difference in brightness of the IR4 channel (10.3-11.5 µm) and the near-infrared channel (1.58-1.64 µm), low cloud can be distinguished, producing a fog satellite picture. The main advantage of infrared is that images can be produced at night, allowing a continuous sequence of weather to be studied.
These infrared pictures can depict ocean eddies or vortices and map currents such as the Gulf Stream which are valuable to the shipping industry. Fishermen and farmers are interested in knowing land and water temperatures to protect their crops against frost or increase their catch from the sea. Even El Niño phenomena can be spotted. Using color-digitized techniques, the gray shaded thermal images can be converted to color for easier identification of desired information.
[edit] Climatology
In the field of climatology, atmospheric infrared radiation is monitored to detect trends in the energy exchange between the earth and the atmosphere. These trends provide information on long term changes in the earth's climate. It is one of the primary parameters studied in research into global warming together with solar radiation.
A pyrgeometer is utilized in this field of research to perform continuous outdoor measurements. This is a broadband infrared radiometer with sensitivity for infrared radiation between approximately 4.5 µm and 50 µm.
[edit] Astronomy
Astronomers observe objects in the infrared portion of the electromagnetic spectrum using optical components, including mirrors, lenses and solid state digital detectors. For this reason it is classified as part of optical astronomy. To form an image, the components of an infrared telescope need to be carefully shielded from heat sources, and the detectors are chilled using liquid helium.
The sensitivity of Earth-based infrared telescopes is significantly limited by water vapor in the atmosphere, which absorbs a portion of the infrared radiation arriving from space outside of selected atmospheric windows. This limitation can be partially alleviated by placing the telescope observatory at a high altitude, or by carrying the telescope aloft with a balloon or an aircraft. Space telescopes do not suffer from this handicap, and so outer space is considered the ideal location for infrared astronomy.
The infrared portion of the spectrum has several useful benefits for astronomers. Cold, dark molecular clouds of gas and dust in our galaxy will glow with radiated heat as they are irradiated by imbedded stars. Infrared can also be used to detect protostars before they begin to emit visible light. Stars emit a smaller portion of their energy in the infrared spectrum, so nearby cool objects such as planets can be more readily detected. (In the visible light spectrum, the glare from the star will drown out the reflected light from a planet.)
Infrared light is also useful for observing the cores of active galaxies which are often cloaked in gas and dust. Distant galaxies with a high redshift will have the peak portion of their spectrum shifted toward longer wavelengths, so they are more readily observed in the infrared.[2]
[edit] Art history and Archaeology
Infra-red (as art historians call them) reflectograms are taken of paintings to reveal underlying layers, in particular the underdrawing or outline drawn to by the artist as a guide. This often uses carbon black which shows up well in reflectograms, so long as it has not also been used in the ground underlying the whole painting. Art historians are looking to see if the visible layers of paint differ from the under-drawing or layers in between - such alterations are called pentimenti when made by the original artist. This is very useful information in deciding whether a painting is the prime version by the original artist or a copy, and whether it has been altered by over-enthusiatic restoration work. Generally the more pentimenti, the more likely a painting is to be the prime version. It also gives useful insights into working practices. [2]
Among many other changes in the Arnolfini Portrait of 1434 (right), his face was higher by about the height of his eye, hers was higher, and her eyes looked more to the front. Each of his feet was underdrawn in one position, painted in another, and then overpainted in a third. These alterations are seen in infra-red reflectograms.[11]
Similar uses of infrared are made by archaeologists on various types of objects, especially very old written documents such as the Dead Sea Scrolls, the Roman works in the Villa of the Papyri, and the Silk Road texts found in the Dunhuang Caves.[12] Carbon black used in ink can show up extremely well.
[edit] Biological systems
The pit viper is known to have two infrared sensory pits on its head. There is controversy over the exact thermal sensitivity of this biological infrared detection system.[13][14]
Other organisms that actively employ thermo-receptors are rattlesnakes (Crotalinae subfamily) and boas (Boidae family), the Common Vampire Bat (Desmodus rotundus), a variety of jewel beetles (Melanophila acuminata)[15], darkly pigmented butterflies (Pachliopta aristolochiae and Troides rhadamathus plateni), and possibly blood-sucking bugs (Triatoma infestans).[16]
[edit] The Earth as an infrared emitter
The Earth's surface and the clouds absorb visible and invisible radiation from the sun and re-emit much of the energy as infrared back to the atmosphere. Certain substances in the atmosphere, chiefly cloud droplets and water vapor, but also carbon dioxide, methane, nitrous oxide, sulfur hexafluoride, and chlorofluorocarbons[17], absorb this infrared, and re-radiate it in all directions including back to Earth. Thus the greenhouse effect keeps the atmosphere and surface much warmer than if the infrared absorbers were absent from the atmosphere.[18]
[edit] History of infrared science
The discovery of infrared radiation is ascribed to William Herschel, the astronomer, in the early 19th century. Herschel published his results in 1800 before the UK Royal Society. Herschel used a prism to refract light from the sun and detected the infrared, beyond the red part of the spectrum, through an increase in the temperature recorded on a thermometer. He was surprised at the result and called them "Calorific Rays". The term 'Infrared' did not appear until late in the 19th century.
Other important dates include:[5]
- 1835: Macedonio Melloni makes the first thermopile IR detector;
- 1859: Gustav Kirchhoff formulates the blackbody theorem E = J(T,n);
- 1873: Willoughby Smith discovers the photoconductivity of selenium;
- 1879: Stefan-Boltzmann law formulated empirically
- 1880s & 1890s: Lord Rayleigh and Wilhelm Wien both solve part of the blackbody equation, but both solutions are approximations that "blow up" out of their useful ranges. This problem was called the "UV Catastrophe and Infrared Catastrophe".
- 1901: Max Planck published the blackbody equation and theorem. He solved the problem by quantizing the allowable energy transitions.
- Early 1900s: Albert Einstein develops the theory of the photoelectric effect, determining the photon. Also William Coblentz in spectroscopy and radiometry.
- 1917: Case develops thallous sulfide detector; British develop the first infra-red search and track (IRST) in World War I and detect aircraft at a range of one mile;
- 1935: Lead salts-early missile guidance in World War II;
- 1938: Teau Ta-predicted that the pyroelectric effect could be used to detect infrared radiation.
- 1952: H. Welker discovers InSb;
- 1950s: Paul Kruse (at Honeywell) and Texas Instruments form infrared images before 1955;
- 1950s and 1960s: Nomenclature and radiometric units defined by Fred Nicodemenus, G.J. Zissis and R. Clark, Jones defines D*;
- 1958: W.D. Lawson (Royal Radar Establishment in Malvern) discovers IR detection properties of HgCdTe;
- 1958: Falcon & Sidewinder missiles developed using infrared and the first textbook on infrared sensors appears by Paul Kruse, et al.
- 1962: J. Cooper demonstrated pyroelectric detection;
- 1962: Kruse and ? Rodat advance HgCdTe; Signal Element and Linear Arrays available;
- 1965: First IR Handbook; first commercial imagers (Barnes, Agema {now part of FLIR Systems Inc.}; Richard Hudson's landmark text; F4 TRAM FLIR by Hughes; phenomenology pioneered by Fred Simmons and A.T. Stair; U.S. Army's night vision lab formed (now Night Vision and Electronic Sensors Directorate (NVESD), and Rachets develops detection, recognition and identification modeling there;
- 1970: ? Boyle & ? Smith propose CCD at Bell Labs for picture phone;
- 1972: Common module program started by NVESD;
- 1978: Pommernig & ? Francis fabricate IRCCDs; US Common Module leads to a proliferation of IR Sensors in the U.S. military; commercial IR companies formed (Inframetrics in Boston, MA and FLIR Systems Inc. in Portland OR); Infrared imaging astronomy comes of age, observatories planned, IRTF on Mauna Kea opened; 32 by 32 and 64 by 64 arrays are produced in InSb, HgCdTe and other materials.
[edit] See also
[edit] References
- ^ Dr. S. C. Liew. Electromagnetic Waves (English). Centre for Remote Imaging, Sensing and Processing. Retrieved on 2006-10-27.
- ^ a b IR Astronomy: Overview (English). NASA Infrared Astronomy and Processing Center. Retrieved on 2006-10-30.
- ^ Reusch, William (1999). Infrared Spectroscopy. Michigan State University. Retrieved on 2006-10-27.
- ^ IPAC Staff. Near, Mid and Far-Infrared. NASA ipac. Retrieved on 2007-04-04.
- ^ a b Miller, Principles of Infrared Technology (Van Nostrand Reinhold, 1992), and Miller and Friedman, Photonic Rules of Thumb, 2004.
- ^ Ramaswami, Rajiv (May, 2002). Optical Fiber Communication: From Transmission to Networking (English). IEEE. Retrieved on 2006-10-18.
- ^ Introduction to Solar Energy (DOC). Passive Solar Heating & Cooling Manual. Rodale Press, Inc. (1980). Retrieved on 2007-08-12.
- ^ McCreary, Jeremy (October 30, 2004). Infrared (IR) basics for digital photographers-capturing the unseen (Sidebar: Black Body Radiation). Digital Photography For What It's Worth. Retrieved on 2006-11-07.
- ^ a b c How Night Vision Works. American Technologies Network Corporation. Retrieved on 2007-08-12.
- ^ Bryant, Lynn (2007-06-11). How does thermal imaging work?.... Retrieved on 2007-08-12.
- ^ National Gallery Catalogues: The Fifteenth Century Netherlandish Paintings by Lorne Campbell, 1998, ISBN 185709171
- ^ International Dunhuang Project An Introduction to digital infrared photography and its application within IDP -paper pdf 6.4 MB
- ^ B. S. Jones; W. F. Lynn; M. O. Stone (2001). "Thermal Modeling of Snake Infrared Reception: Evidence for Limited Detection Range". Journal of Theoretical Biology 209 (2): 201-211. doi:10.1006/jtbi.2000.2256.
- ^ V. Gorbunov; N. Fuchigami; M. Stone; M. Grace; V. V. Tsukruk (2002). "Biological Thermal Detection: Micromechanical and Microthermal Properties of Biological Infrared Receptors". Biomacromolecules 3 (1): 106-115. doi:10.1021/bm015591f.
- ^ Evans, W.G. (1966). "Infrared receptors in Melanophila acuminata De Geer". Nature 202: 211. DOI:10.1038/202211a0. Retrieved on 2007-05-07.
- ^ A.L. Campbell, A.L. Naik, L. Sowards, M.O. Stone (2002). "Biological infrared imaging and sensing". Micron 33 (2): 211-225.
- ^ Global Sources of Greenhouse Gases. Emissions of Greenhouse Gases in the United States 2000. Energy Information Administration (2002-05-02). Retrieved on 2007-08-13.
- ^ Clouds & Radiation. Retrieved on 2007-08-12.
[edit] External links
[edit] Journals
- Infrared Physics and Technology (Elsevier) (last access June 2005).
[edit] Web sites
- List of infrared application examples broken down by industry from FLIR Systems
- Infrared Spectroscopy NASA Open Spectrum wiki site.
- IrDAOrganization that creates low cost infrared data interconnection standards.
- How to build an USB infrared receiver to remote control PCs
- Infrared WavesDetailed explanation of infrared light.
- U.S. Navy - Electronic Warfare and Radar Systems Engineering Handbook Source of transmittance diagram and further information on electro-optics.
- Infrared a Historical Perspective
| [hide] | |
|---|---|
| (Sorted by wavelength, short to long) Gamma ray • X-ray • Ultraviolet • Visible spectrum • Infrared • Terahertz radiation • Microwave • Radio waves | |
| Visible (optical) spectrum | Red • Orange • Yellow • Green • Blue • Violet |
| Microwave spectrum | W band • V band • K band: Ka band, Ku band • X band • C band • S band • L band |
| Radio spectrum | EHF • SHF • UHF • VHF • HF • MF • LF • VLF • ULF • SLF • ELF |
| Wavelength designations | Microwave • Shortwave • Mediumwave • Longwave |
Personal tools
Toolbox
In other languages
- العربية
- বাংলা
- Bosanski
- Български
- Català
- Česky
- Dansk
- Deutsch
- Eesti
- Español
- Esperanto
- Euskara
- فارسی
- Français
- Galego
- 한국어
- Hrvatski
- Ido
- Bahasa Indonesia
- Íslenska
- Italiano
- עברית
- Latviešu
- Lietuvių
- Bahasa Melayu
- Nederlands
- 日本語
- Norsk (bokmål)
- Norsk (nynorsk)
- Polski
- Português
- Русский
- Shqip
- Simple English
- Slovenčina
- Slovenščina
- Српски / Srpski
- Suomi
- Svenska
- தமிழ்
- Tiếng Việt
- Türkçe
- Українська
- 中文
- This page was last modified 19:21, 27 August 2007.
- All text is available under the terms of the GNU Free Documentation License. (See Copyrights for details.)
Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a U.S. registered 501(c)(3) tax-deductible nonprofit charity. - Privacy policy
- About Wikipedia
- Disclaimers
No comments:
Post a Comment